View Full Version : Best transformers class?
Commandergree11
10-27-2009, 09:36 PM
Ok, i have a question. So im wanting to get into customizing (like transformers) and was wondering which was the best class to start with, i mean leader class probably isnt the best idea. But i was thinking maybe scout? deluxe? legends look too small. Deluxe... im not sure. Same with scout. Input anyone?
Thanks!
I would say deluxe is probably the way to go. That way you don't have too many parts to make it discouraging, but still have pieces large enough to deal with easily.
payton34
10-27-2009, 09:45 PM
Personally, I would start with a voyager-class figure. They have their share of details, but the detailed bits are (for the most part) easier to get to as opposed to the smaller deluxe figures.
Commandergree11
10-27-2009, 09:50 PM
Hmm... alright, i was trying to look for a kind of blocky voyager or deluxe the other day, and on the way to the store i thought about ratchet, but i didnt know what i could do to him, and i couldnt find one at the store... What would be a good voyager or deluxe to start i can decide for my self, but yall have worked with these figures, so, opinions?)
thyvipera
10-27-2009, 09:54 PM
i'm with payton, i'd suggest voyager class, maybe some classics/universe, like onslaught, powerglide
but i have a feeling that you're going for the movie figures
BigHank
10-27-2009, 09:55 PM
You could always do a classic white/red scheme on V. Ratchet.
Also with Deluxe Bumblebee you can just go for a more accurate version of what's already there.
I like all classes, I find they all have their fun points! Money is an issue, and if it's for resale, you're sure to be profitable with a deluxe.
Commandergree11
10-27-2009, 09:56 PM
i'm with payton, i'd suggest voyager class, maybe some classics/universe, like onslaught, powerglide
but i have a feeling that you're going for the movie figures
yeah you're right, i mean im 13 so ill ive seen are the live action movies. Ill check those out. How about deluxe class brawl?
thyvipera
10-27-2009, 10:03 PM
i dont have much experience with the movie toys, but i know they have a lot more details than classics/universe.
i think deluxe brawl would be good. it would give u a great opportunity to try out "dry brushing", especially on brawls tracks,
be sure to check out the how-to section:
http://procustomizers.com/forumdisplay.php?f=3
there's some great tips spreading around
Solrac333
10-27-2009, 10:27 PM
I started with the crappiest figure I had to practice on. It was the deluxe classics Megatron. That ugly green tank.
Hotwire
10-27-2009, 10:55 PM
My first custom was Voyager ROTF Ironhide. However, before I started on him, I practiced painting techniques on Scout Class Rollbar.
Boggs6ft7
10-28-2009, 07:31 AM
I think for starting out, deluxe is the way to go. No too intimidating, fewer parts to lose, etc... Also, its less likely you will get frustrated and quit after doing a deluxe.
Commandergree11
10-28-2009, 07:55 AM
i dont have much experience with the movie toys, but i know they have a lot more details than classics/universe.
i think deluxe brawl would be good. it would give u a great opportunity to try out "dry brushing", especially on brawls tracks,
be sure to check out the how-to section:
http://procustomizers.com/forumdisplay.php?f=3
there's some great tips spreading around
About dry brushing... ive seen how to do it, but do you need to dry brush everything on the figure for a smooth paint job?
Commandergree11
10-28-2009, 07:57 AM
My first custom was Voyager ROTF Ironhide. However, before I started on him, I practiced painting techniques on Scout Class Rollbar.
yeah i thought about getting a scout too to practice on. Good idea!
frenzyrumble
10-28-2009, 08:35 AM
I know it's not normal, and perhaps a bigger sink into costs - but I would recommend a detailed leader or ultra class figure. The "large" canvas will give you lots of practice and lots of room to try many techniques. One of the first custom TFs I did was leader class Brawl (TFTM 07)
Hotwire
10-28-2009, 03:28 PM
About dry brushing... ive seen how to do it, but do you need to dry brush everything on the figure for a smooth paint job?
No, but if you are brushing the paint on, you do need to thin the paint and do several VERY THIN coats. Do not try to get complete coverage on your first coat.
yeah i thought about getting a scout too to practice on. Good idea!
They're cheaper to. I seriously recommend Rollbar because he has simple robot parts and lots of flat surface to practice on.
Commandergree11
10-28-2009, 05:12 PM
No, but if you are brushing the paint on, you do need to thin the paint and do several VERY THIN coats. Do not try to get complete coverage on your first coat.
They're cheaper to. I seriously recommend Rollbar because he has simple robot parts and lots of flat surface to practice on.
how do you thin it?
Commandergree11
10-28-2009, 06:07 PM
i'm with payton, i'd suggest voyager class, maybe some classics/universe, like onslaught, powerglide
but i have a feeling that you're going for the movie figures
Is this the onsluaght you were talking about?
thyvipera
10-28-2009, 10:35 PM
Is this the onsluaght you were talking about?
yep that's him
Commandergree11
10-28-2009, 10:55 PM
yep that's him
im gonna go for him. He looks awesome!
Hotwire
10-29-2009, 09:41 AM
how do you thin it?
Depends on the brand of paint. Like Tamiya, for example, you use alcohol. As for the amounts, use the TAR method. That's About Right.
Commandergree11
10-29-2009, 08:26 PM
yep that's him
hey i sent you a PM.