Removing the whip of Jolt

[Shadow]

Anyone knows how to remove a type of screw? It's the arm of RotF Jolt and I'm trying to remove the whip

http://1.bp.blogspot.com/_dVfUNpMfEN0/SsMUMLenWxI/AAAAAAAAA7E/JouIcO_xYWs/s1600/DSC00209.JPG

[mampy]

That's a huge and fuzzy pic there.

But yeah I've been wondering how to remove the whips, too. I don't have a soldering iron yet so pins can be a bit of a problem.

[frenzyrumble]

well, do you want to keep the whips? there's a pin holding them in place. heating up the pin will allow you to slide it right off. If you don't care about the whip's condition, use a dremel drill bit and hit the pin until it's hot, then use some needle-nose pliers or tool to pry the pin out.

[Hotwire]

Took the whips off of my Jolt. I trimmed the two studs on the inside of the arm, then heated up the pin, and it pulled right out. You could also remove the roof pieces to gain more access.