Transformers Generations: (Classics) The Fallen

[RodimusdawG]

The FALLEN shall Rise Again!!! And he has. With my newest custom.

Had this sitting in my to do box and finished it up last week sometime while working on other things at the same time.

The Fallen was made from a Universe Onslaught/Hardhead mold and I must say after using it twice now I really love this base fig. Big and solid but plenty of room to dabble and tinker in.

For this version of the Fallen I wanted to go a bit more steampunkish with the feel to it. More or less I wanted him to look at bit like a old style steam furnace or cast iron black stove of death. Thus the silver paint apps on the rivet on top of his black base body.

And before anyone starts getting up in arms about the Decepticon symbols I wanted to give this fallen more a movie and WWI mash of origins. One other mixing of the two in the weapons area.

http://www.procustomizers.com/attachment.php?attachmentid=3639&stc=1&d=1281555673

http://www.procustomizers.com/attachment.php?attachmentid=3640&stc=1&d=1281555673

http://www.procustomizers.com/attachment.php?attachmentid=3641&stc=1&d=1281555673

http://www.procustomizers.com/attachment.php?attachmentid=3643&stc=1&d=1281555673

http://www.procustomizers.com/attachment.php?attachmentid=3644&stc=1&d=1281555673

WEAPONS
========
If figure The Fallen as more of a melee bot. So I loaded him out with a plethora of close combat weaponry. The Javelins on his back also give him the flaming inferno on his back like in the comics. The Axe, claw,and javelins came from a Sigma Six Cobra Commander and the use of these weapon are inspired by Autobot X23's custom of the same Character.


http://www.procustomizers.com/attachment.php?attachmentid=3645&stc=1&d=1281555673

http://www.procustomizers.com/attachment.php?attachmentid=3646&stc=1&d=1281555673


*- The Javelins can connect together giving The Fallen not only another melee weapon but also a nod to his movie incarnation whom wielded one as well.
http://www.procustomizers.com/attachment.php?attachmentid=3647&stc=1&d=1281555673

http://www.procustomizers.com/attachment.php?attachmentid=3649&stc=1&d=1281555673

http://www.procustomizers.com/attachment.php?attachmentid=3650&stc=1&d=1281555673


Alt mode
=======
In alt mode it is still essentially the same mold with a few tweaks. For the turret barrels I use movie Brawls cannons. I took out the electronics and sunk in the light bar. The scarring on the Alt mode all line up for the most part,but in bot mode they are a bit more scattered which was one of my favorite aspects of this custom.



http://www.procustomizers.com/attachment.php?attachmentid=3651&stc=1&d=1281555673

http://www.procustomizers.com/attachment.php?attachmentid=3653&stc=1&d=1281555673

http://www.procustomizers.com/attachment.php?attachmentid=3655&stc=1&d=1281555673

http://www.procustomizers.com/attachment.php?attachmentid=3656&stc=1&d=1281555673

Hope everyone gets a kick outta this and as always C&C :D

[stevescustoms]

That's very cool. I really like the flaming weapons. Very nice job.

[formula93]

This is outstanding. I may blatantly steal your idea and try one of my own.

[speedleescustoms]

I love it... I love the flaming effects you did on him... The flaming weapons are a great addition as it paired up perfectly with the dark scheme you went with the figure... Awesome man ! :D

[reddragon162]

Very awesome! I love this version of the REAL Fallen.

[Kratos]

The flame effect is unreal man!!! Damn cool and your work is awesome!

[Solrac333]

I cannot stop looking at this.

Does it still have the wheel gimmick? I disabled mine so that it can actually roll freely.

[robdavidaustin]

I really like the in-groove pin striping! It's like he's made of lava!!

[RodimusdawG]

Thanks for the comments guys!!!!:D



This is outstanding. I may blatantly steal your idea and try one of my own.

Go for it, this was a definite fast easy and fun kitbash to do. Biggest problem was getting Onslaughts jaw to fit properly on the Alternators Prowl's face.


I cannot stop looking at this.

Does it still have the wheel gimmick? I disabled mine so that it can actually roll freely.

It is still there but with the paint it is a bit more resistant to rolling than it originally was. Going to have to go back in an disable it myself as well.

[OMEGAPRIME1983]

Great work RD. I love the blending you did in the torn metal areas and in the windows. And I didn't realize how much Alt prowls head looked as the fallen till now, good eye my friend!

[RodimusdawG]

And here is another little tid bit I was waiting to reveal fully and it is a Melee weapon stand.

I use a Gundam 1/60 PG RX-78 for the torso with a lot of the panels ripped off and butcher for battle damage. I base coated it black and drybrushed it numerous shades of metallic silver and then use a bright pink watered down to look like energon life liquid flowing from various points.

with me watering down the pink paint I helped give a natural downward flow to give it more realistic look IMO.



http://www.procustomizers.com/attachment.php?attachmentid=3683&stc=1&d=1281951888


http://www.procustomizers.com/attachment.php?attachmentid=3684&stc=1&d=1281951888

http://www.procustomizers.com/attachment.php?attachmentid=3685&stc=1&d=1281951888

http://www.procustomizers.com/attachment.php?attachmentid=3686&stc=1&d=1281951888

http://www.procustomizers.com/attachment.php?attachmentid=3687&stc=1&d=1281951888

http://www.procustomizers.com/attachment.php?attachmentid=3688&stc=1&d=1281951888

http://www.procustomizers.com/attachment.php?attachmentid=3689&stc=1&d=1281951888