hemblecreations
12-08-2009, 03:15 AM
Hi All
I've been wanting to do this concept figure that Ron Cobb had done for a long time, I was going to do in 3-3/4" size but a friend of mine Glorbes had already did it http://glorbes.blogspot.com/2009/01/toht-ron-cobb-concept.htmt and it's a great figure. So since I have been doing alot of 1/6 scale Indy figures it was only natural that I would do him in this scale.
RECIPE
1: Concept Toht - The body, left glove, glasses, uniform, boots and hat are all from Dragon, the uniform was dyed black and the hat was also repainted black and detailed with flat white and silver. The head is Toht from Sideshow Toys I added a bionic eye and ear by using some old 40K GW parts I had in the bits box.
As for the bionic arm I used parts from some Hasbro AOTC droids and and a part from a 3-3/4" moisture vaporator and pieces of wire which were in my bits box, The straps that hold the arm onto the body are strips of leather cut to size then attached.
2: Base - The base is very simple as I didn't want anything to detailed to distract from the figure itself, It was made from an old DVD base which I covered with plasti card and cardboard and then gave it a few sprays of Matt Black.
Ron Cobb's Concept Art Work
http://www.hemblecreations.com/indiana%20jones/cct1.jpg
http://www.hemblecreations.com/indiana%20jones/ct1.jpg
http://www.hemblecreations.com/indiana%20jones/ct2.jpg
http://www.hemblecreations.com/indiana%20jones/ct3.jpg
http://www.hemblecreations.com/indiana%20jones/ct4.jpg
http://www.hemblecreations.com/indiana%20jones/ct8.jpg
Ron
I've been wanting to do this concept figure that Ron Cobb had done for a long time, I was going to do in 3-3/4" size but a friend of mine Glorbes had already did it http://glorbes.blogspot.com/2009/01/toht-ron-cobb-concept.htmt and it's a great figure. So since I have been doing alot of 1/6 scale Indy figures it was only natural that I would do him in this scale.
RECIPE
1: Concept Toht - The body, left glove, glasses, uniform, boots and hat are all from Dragon, the uniform was dyed black and the hat was also repainted black and detailed with flat white and silver. The head is Toht from Sideshow Toys I added a bionic eye and ear by using some old 40K GW parts I had in the bits box.
As for the bionic arm I used parts from some Hasbro AOTC droids and and a part from a 3-3/4" moisture vaporator and pieces of wire which were in my bits box, The straps that hold the arm onto the body are strips of leather cut to size then attached.
2: Base - The base is very simple as I didn't want anything to detailed to distract from the figure itself, It was made from an old DVD base which I covered with plasti card and cardboard and then gave it a few sprays of Matt Black.
Ron Cobb's Concept Art Work
http://www.hemblecreations.com/indiana%20jones/cct1.jpg
http://www.hemblecreations.com/indiana%20jones/ct1.jpg
http://www.hemblecreations.com/indiana%20jones/ct2.jpg
http://www.hemblecreations.com/indiana%20jones/ct3.jpg
http://www.hemblecreations.com/indiana%20jones/ct4.jpg
http://www.hemblecreations.com/indiana%20jones/ct8.jpg
Ron